Review physical data, chemical resistance, product guidance, and handling reminders before selecting or applying Convoy non-skid safety coatings.
CamCoat supplies complete special bulletins on each product, as well as detailed information on each product label. Because weather, workmanship, and jobsite conditions cannot be controlled, a general product warranty is not offered.
Compare the three Convoy non-skid systems by type, coverage, dry time, recoat window, temperature resistance, colors, primers, and VOC information.
| Property | Convoy II | Super Convoy | Super “X” Convoy |
|---|---|---|---|
| Product Type | One component waterborne acrylic | Two component epoxy | Two component epoxy |
| Coverage | 100–150 sq. ft./gal. | 125–150 sq. ft./gal. | 50–60 sq. ft./gal. |
| Dry Time | 1 hour | 4 hrs. | 4 hrs. at 72°F |
| Cure / Service Time | 4 hrs. at 72°F; overnight if cool | 2 days at 75°–85°F; one day for light foot traffic; 4 days at 60°F–85°F | 2 days at 75°–85°F; one day for light foot traffic; 4 days at 60°F–85°F |
| Thinner / Reducer | Water | #1109 | #1108 |
| Recommended Coats | One or two | One | One |
| Induction Time | None | None | 30 minutes |
| Pot Life | Indefinite | 8 hrs. maximum | Avg. 6 hrs. maximum depending on temperature |
| Recoat Time | 4 hrs. if necessary | 16 hrs. if necessary | Not necessary |
| Maximum Service Temperature | 200°F | 110°F | 120°F |
| Viscosity | 90–100 K.U. | 80 K.U. | 110 to 120 K.U. |
| Available Sizes | Quarts & Gal.; 5 Gallons | Quarts & Gal.; 5 Gallons | Quarts & Gal.; 5 Gallons |
| Special Order | Special Order | Special Order | Special Order |
| Shelf Life | Indefinite | 2 years | 2 years |
| Abrasion Resistance | Very good | Superb | Superb |
| Chemical Resistance | Excellent | Superb | Superb |
| Colors | #330 White #331 Gray #333 Yellow #334 Green #335 Tile Red #336 Black #338 Orange |
#360 Tile Red #363 Yellow #368 White #369 Black #370 Dark Gray #371 Light Gray #372 Green |
#810 Orange #811 Gray #813 Yellow #818 Tile Red #819 Black #820 White #822 Green |
| Primers | #309 Metal Primer — Metal & Aluminum #310 Wood Primer |
#219 Epoxy Metal Primer — Metal #215 Bonderite Primer — Aluminum |
#219 Epoxy Metal Primer — Metal #215 Bonderite Primer — Aluminum |
| VOC | 0.44 | 2.8 | 1.89 |
The following ratings indicate resistance to splash and spillage exposure. For all applications, review the product label and safety data sheet before use.
| Chemical / Substance | Resistance Rating |
|---|---|
| Acetone | |
| Ammonia | |
| Animal Fats | |
| Aromatic Fuel | |
| Aviation Gas | |
| Beer | |
| Bleach | |
| Chlorinated Solvents | |
| Chromic Acid | |
| Corn Oil | |
| Denatured Alcohol | |
| Detergents | |
| Ethylene Glycol | |
| Fruit Juice | |
| Formaldehyde | |
| Gasoline | |
| Glycerine | |
| Hydrochloric Acid | |
| Hydrogen Peroxide | |
| Jet Fuel | |
| Linseed Oil | |
| Lube Oil | |
| Nitric Acid | |
| Phenol | |
| Phosphoric Acid | |
| Salt Water | |
| Skydrol | |
| Sodium Hydroxide | |
| Steam | |
| Sulfuric Acid | |
| Tannic Acid | |
| Toluene | |
| Trisodium Phosphate Solvents | |
| Fresh Water | |
| Wine | |
| Xylol |
| Rating | Meaning | Use Guidance |
|---|---|---|
| Excellent resistance to splash & spillage | Best rating shown for splash/spillage exposure. | |
| Good resistance to splash & spillage | Acceptable resistance where exposure is limited. | |
| Softens but recovers | Temporary softening may occur, but coating can recover. | |
| Softens if allowed to stand | Avoid prolonged standing exposure where possible. | |
| Complete failure | Not recommended for that exposure condition. |